background image

1

VENT-FREE

GAS LOG SET

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

      WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR 

EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

       WARNING: This appliance 

is equipped for (Natural and 

Propane) gas. Field conversion is 

not permitted other than between 

natural or propane gases.

The Installation instructions for an appliance for installation on combustible flooring shall specify that 

when the appliance is installed directly on carpeting, tile or other combustible material, other than wood 

flooring, the appliance shall be installed on a metal or wood panel extending the full width and depth of 

the appliance.

- Do not store or use gasoline or other flammable vapors and Iiquids in vicinity of this or any other           

  appliance.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor’s phone. Follow the gas 

  supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. 

Provisions for adequate combustion and ventilation air must be provided. Refer to Air For 

Combustion and Ventilation section on page 9 of this manual.

This appliance may be installed in an aftermarket, permanently located manufactured (mobile) home, 

where not prohibited by local codes. This appliance is only for use with propane or natural gas. 

This appliance is equipped with a simple means to switch between propane and natural gas. Field 

conversion by any other means including the use of a kit is not permitted.

Dual Fuel

ANS Z21.11.2 2013

80-10-442 - 2018-05-29

CAUTION - FOR YOUR SAFETY

Questions, problems, missing parts?

 Before returning to your retailer, call our customer service 

department at 1-877-447-4768,

 

8:30 a.m. –  4:30

 

p.m., CST, Monday – Friday or email us at 

[email protected].

MODEL # VFL2-SO18DT

VFL2-EO18DT

VFL2-SO24DT

VFL2-EO24DT

VFL2-WW18DT

VFL2-WW24DT

C           US

C           US

NG

LP

    WARNING: Do not attempt to access or change the setting of the fuel selection means. Access 

to and adjustment of the fuel selection means must only be a performed by a qualified service 

person when connecting this appliance to a specified fuel supply at the time of installation.

Change of the selector setting to other than the fuel type specified at the time of installation could 

damage this appliance and render it inoperable.

The installer shall replace the access cover before completing the installation and operating this 

appliance.

Patent Pending Dual 

Fuel System

Содержание VFL2-EO18DT













Отзывы: