Firegear KALEA BAY Скачать руководство пользователя

Страница: 39 / 44

Kalea Bay LED Outdoor Fireplace

REV. B Page 39

FIREGEAR LIMITED WARRANTY - 2020

Firegear Outdoors hereby warrants to the end user that products will be free from material and workmanship

defects that prevent safe and correct operation of the product. The warranty commences from date of sale to

the end user for the following period:

CONSUMER RESIDENTIAL APPLICATIONS – MANUFACTURED AFTER 12/02/2019

BURNER SYSTEMS, BURNERS, COMPONENTS AND ACCESSORIES

• LIFETIME WARRANTY ON CONSTRUCTION AND MANUFACTURER DEFECTS

• LIFETIME WARRANTY - STAINLESS STEEL BURNERS AND PANS

• LIFETIME WARRANTY - BRASS BURNERS

• FIVE (5) YEAR WARRANTY - GAS VALVE, SPARK IGNITER, PILOT ASSEMBLIES

• FIVE (5) YEAR WARRANTY - AWS ELECONITC IGNITION SYSTEMS (24VAC, 30 VDC)

• FIVE (5) YEAR WARRANTY - TFS/TMSI ELECTRONIC COMPONENTS

• FIVE (5) YEAR WARRANTY – MT COMPONENTS (KEY VALVE)

• FIVE (5) YEAR WARRANTY - REFRACTORY GAS LOG SETS

• FIVE (5) YEAR WARRANTY - READY TO FINISH/ANF FIRE PIT ENCLOSURES

• FIVE (5) YEAR WARRANTY – SKYTECH MANUACFTURED OPTIONAL CONTROLS

OUTDOOR FIREPLACE – KALEA BAY

• LIFETIME WARRANTY - CONSTRUCTION AND MANUFACTURER DEFECTS

• LIFETIME WARRANTY - STAINLESS STEEL COMPONENTS

• FIVE (5) YEAR WARRANTY - GAS VALVE, PILOT ASSEMBLY, POWER SUPPLY, CONTROLS

• FIVE (5) YEAR WARRANTY – SKYTECH MANUACFTURED OPTIONAL CONTROLS

SANCTUARY SERIES – GFRC FIRE FEATURES

• THREE (3) YEAR WARRANTY - GFRC STRUCTURE

• REFER TO THE APPROPRIATE BURNER SYSTEM FOR WARRANTY

WARRANTY COVERS MANUFACTURING DEFECTS OR STRUCTURAL FAILURE. SMALL STRESS CRACKS AND SURFACE

CRAZING ARE A NATURAL OCCURRENCE IN GFRC PRODUCTS AND NOT COVERED BY WARRANTY.

READY TO FINISH/ANF ENCLOSURES

• FRAME – LIFETIME WARRANTY ON CONSTRUCTION AND MANUFACTURER DEFECTS

ACCESSORIES

• LIFETIME WARRANTY - CONSTRUCTION AND MANUFACTURER DEFECTS

• LIFETIME WARRANTY - STAINLESS STEEL COMPONENTS (LIDS, STAINLESS STEEL COVERS)

• ONE (1) YEAR WARRANTY – ESTOP1-OH, ESTOP2-5H WINDSHIELDS, HOSES AND REGULATORS

Содержание KALEA BAY













































Результаты поиска

Содержание KALEA BAY

Отзывы:

Похожие инструкции для KALEA BAY

Бренды по названию

Популярные бренды

Firegear KALEA BAY, Инструкция по установке и эксплуатации

Результаты поиска

Содержание KALEA BAY

Отзывы:

Похожие инструкции для KALEA BAY

Бренды по названию

Популярные бренды