Firegear KALEA BAY Скачать руководство пользователя

Страница: 3 / 44

Kalea Bay LED Outdoor Fireplace

REV. B Page 3

SAFETY

CERTIFICATION:

These outdoor fireplaces are tested and

approved to ANSI Z21.97- 2017/CSA 2.41.standards by

PFS agency using listing #20-024. It should be installed

by a qualified installer in accordance with local and state

building codes using National Fuel Gas Code ANSI Z223.1/

NFPA54 or current CSA-B149.1 installation codes for Gas

Burning Appliances and Equipment in Canada.

DESCRIPTION:

These Outdoor fireplace models come

ready to operate with HI/LO capabilities once installation is

complete. They use an electronic ignition that runs off of

a 7.5DCV adapter. In addition, each fireplace is equipped

with LED lighting as a standard feature. All models can

operate the LED lights with or without the fireplace

operating. The LED lights operate from of a 12-volt adapter.

Use only approved media. All models are shipped as

Natural Gas but can be converted to Propane Gas by

ordering an optional conversion kit. See page 32.

NEVER obstruct the front opening(s) of the fireplace.

LOCAL CODES

Install and use fireplace with care. Follow all local codes.

In the absence of local codes, use the latest edition of the

National Fuel Gas Code ANSI Z223.1/ NFPA54.

All media (i.e. lava rock, lava stones, lava boulders and

fire glass) have the potential of thermal spalling. This is a

process that may occur when media is wet and moisture

gets trapped inside of the material due to rapid temperature

differences. When this happens the media has the

potential to crack or “pop” outside the fireplace. Heavy

rains, high humidity and the presence of moisture can

contribute to this process.

1. This appliance is configured from the factory only as

Natural gas. It can be converted to LP gas.

2. Do not place Propane (LP) supply tanks inside any

unapproved structures. Locate propane tanks outdoors

if unsure.

3. This fireplace is to be used only outdoors in a well

ventilated space and shall not be used in a building,

garage, or any other enclosed area.

4. Do not use this fireplace as a wood burning fireplace.

Use only high temperature glass media approved for

use with this fireplace.

5. Do not use this fireplace to cook or burn paper or other

objects.

6. Do not use if exposed to or under water. Immediately

call a qualified service technician to inspect the

fireplace and replace any part of the control system

and any gas control which has been under water.

7. Turn fireplace OFF and let cool before servicing. Only

a qualified service person should perform service.

CAUTION:

Massachusetts Requirements

These appliances are approved for installation in the

US state of Massachusetts if the following additional

requirements are met:

• Un-vented Room Heaters shall be installed in

accordance with 527 CMR 30.

• Installation and repair must be done by a plumber

or gas fitter li¬censed in the Commonwealth of

Massachusetts.

• The flexible gas line connector used shall not exceed

36 inches (92 centimeters) in length.

• The individual manual shut-off must be a T-handle type

valve.

• Unvented appliances may NOT be installed in

bedrooms or bath¬rooms.

• A working smoke detector must be installed in the area

where vent-free appliances are installed.

• Seller of unvented propane or natural gas-fired

supplemental room heaters shall provide to each

purchaser a copy of 527 CMR 30 upon sale of the unit.

ALWAYS USE CAUTION WHEN USING THE FIREPLACE

Extra caution should be taken when lighting a fireplace

when heavy rains, high humidity and moisture are present.

Light the fireplace and leave the area while the heat

dissipates any moisture out of the media. We strongly

recommend that during this drying out time that you monitor

the fireplace from a distance. This drying out period should

be no less than 30 minutes. Continue monitoring the flame

from a safe distance to ensure that all popping has ceased

before fully enjoying the fire.

Содержание KALEA BAY













































Результаты поиска

Содержание KALEA BAY

Отзывы:

Похожие инструкции для KALEA BAY

Бренды по названию

Популярные бренды

Firegear KALEA BAY, Инструкция по установке и эксплуатации

Результаты поиска

Содержание KALEA BAY

Отзывы:

Похожие инструкции для KALEA BAY

Бренды по названию

Популярные бренды