Kalea Bay LED Outdoor Fireplace
REV. B Page 24
FINAL PREPARATION
Step 20:
Install the burner pan back into the fireplace. See
Fig. 29.
Fig. 32
Pilot hood installed, showing ventilation at front
edge of burner pan.
Fig. 29
Shows burner pan installed into fireplace.
Pilot Hoo
d
Burn
er Pa
n
Step 21:
Install ignition screen (from parts box) overtop
of the burner tube with the cutout area centered behind
the pilot box ignition hole as shown in Fig. 30. The ignition
screen sit on top of the burner tube.
Fig. 30
Installing ignition screen.
Step 22:
Place pilot hood on top of the pilot box and ensure
if sits flat, providing ventilation for the pilot at the front edge
of the burner pan. See Figs. 31 and 32.
Fig. 31
Pilot hood installing over top of pilot box.
NOTE
:
The pilot hood will have a plastic film that must
be removed before installing.
Remove the plastic film from the pilot hood and place it on
top of the pilot box as shown in Fig. 32.
Pilot
Burn
er Pa
n
Ignition Hole
Media
Barrie
r
Burn
er Pa
n
Pilot H
ood In
stalled
Ignition Screen
