Heat & Glo • Log Placement Instructions • 2128-935 Rev. B • 2/17
1
STEP 1.
CAUTION!
Logs are fragile!
Carefully remove the logs and cardboard tray from the inside of the
fi
replace.
See Figure 1. Remove the microfoam and inspect the logs for damage. Inspect the four factory installed logs for damage.
Locate the pilot in order to verify your position in relation to the appliance. See Figure 2.
Log Set Assembly: LOGS-2128
Models: ST-36TRB-IPI, PIER-36TRB-IPI
ST-36TVB-IPI, LCOR-36TRB-IPI, RCOR-36TRB-IPI
ST-36TRB-IFT, PIER-36TRB-IFT
LOG PLACEMENT
INSTRUCTIONS
Figure 2. Factory Installed Logs
Figure 2. Factory Installed Logs
F
Figure 1. Log Assembly Location
igure 1. Log Assembly Location
STEP 2. Log #1 (SRV2128-704):
Mate the notch on the end of log # 1 with the hump on top of log A. Set the other
end of Log #1 onto the smooth area on top of Log C.
CAUTION: DO NOT reposition logs that have been
factory installed!
Follow these instructions to position
the logs that were packaged separately.
PILOT
PILOT
Figure 4. Placement of Log #1
Figure 4. Placement of Log #1
F
Figure 3. Placement of Log #1
igure 3. Placement of Log #1
1
1
11
A
A
11
22
33
A
A
D
D
B
B
C
C
NOTCH
NOTCH
HUMP
HUMP
C
C