Festo SFC-LAC CO Series, Руководство пользователя

Страница: 266 / 328

B. Parametrizing in accordance with FHPP−FPC
B−72
Festo P.BE−SFC−LAC−CO−EN en 0708NH
Output Stage Upper Threshold Temperature
PNU 1069 uint16 r
Description Upper temperature threshold for SFC−LAC: 85 °C. When this temperature is
reached, an error message is triggered. Restart only after the temperature has
dropped below the lower threshold (see PNU 1068).
CI / DS402 6510h 34h uint16 r
Power Supply
PNU 1070 int32 rw
Description Output of power supply unit in [W]. Value range: 0
Ū
3000 W. Default: 960 W.
The nominal power rating must be specified exactly. Rounding (e.g. from 960W
to 1000W) is not permitted.
CI / DS402 6510h 50h int32 rw
Tool Load
PNU 1071 uint32 rw
Description Tool load (e.g. a gripper on front panel of the HME−...)
Value range: HME−16: 0
Ū
10000 g. HME−25: 0
Ū
25000 g.
CI / DS402 6510h 51h uint32 rw
Start Delay Commutation
PNU 1072 uint32 rw
Description Waiting time [ms] between ENABLE and the start of the commutation point
search. Default = 0 ms.
During the search for the commutation point the HME vibrates. If several HMEs
are fitted in a system which can vibrate and if the search for the commutation
point is made at the same tim, it may happen that the vibrations are superim
posed and the complete system vibrates in an uncontrolled manner. The HMEs
cannot then complete the search for the commutation point successfully.
·
In this case start the search for the commutation point at staggered intervals:
by enabling the HMEs at staggered intervals via the PLC/IPC or
via this object.
CI / DS402 2051h 00h uint32 rw