![background image](http://html1.mh-extra.com/html/feig-electronic/tst-fuz2-a/tst-fuz2-a_assembly-instructions-manual_548932014.webp)
TST
Assembly instructions
FUZ2 -A/-B/-C/-CX/-L
FEIG ELECTRONIC GmbH
Page 12 of 71
FUZ2-A-B-C-CX-L_Montageanleitung_GB
_10.docx
The following images show the installation of the heat sink with the controller:
Step 1: install additional heat sink
Use the following screws:
Use countersunk screw M4 DIN 965
Step 2: remove the spacer
Do not use spacers!
Step 3: install the controller
All four screws must be
completely recessed!