![background image](http://html1.mh-extra.com/html/feig-electronic/tst-fuz2-a/tst-fuz2-a_assembly-instructions-manual_548932008.webp)
TST
Assembly Instructions
FUZ2-A/-B/-C/-CX/-L
FEIG ELECTRONIC GmbH
Page 6 of 71
FUZ2-A-B-C-CX-L_Montageanleitung_GB_10.docx
1
General description and intended use
The device described below is an electronic control system for motor-driven industrial or commercial doors in
accordance with
EN 13241
. A fully integrated frequency converter with power output stage can gently control
the door with variable opening and closing speeds. The control system
TST FUZ2
is designed to handle
electrical induction motors with a power consumption of up to 1.5 kW and a 230 V supply
In addition to controlling the motor that drives the door, the controller can be used for the following tasks:
Positioning the door at and between its final positions (open, close and intermediate positions)
To control the drive to run at different speeds (integrated frequency converter)
Evaluation of the security sensors on the door (e.g. safety edge monitoring, pull-in protection, etc.)
Evaluation of additional safety equipment on the door (e.g. photo eyes, light curtains, etc.)
Evaluation of control circuits at the door (e.g. pull switch, radio, inductive loops, etc.)
Evaluation of emergency stop controls
Electronically protected 24V low-voltage power supply for sensors and control devices
230 V power supply to external units
Control of application-specific outputs (such as relays for door position reporting)
Generation and output of diagnostic messages
Configuration of application-specific parameters for different levels of access of the different user groups
Control of input/output expansion modules:
o
TST SFFE:
plug-in module wireless remote control
o
TST FSx:
wireless Security System
o
TST SURA:
Safety edge evaluation board
o
TST SUVEK:
plug-in module for inductive loop detection
o
TST RFUxK:
universal display and input/output module
o
TST RFUxFCOM:
interface module for the lock-door applications, etc.
o
TST SRA:
connectable module auxiliary relay
o
TST LCD / clear text:
Clear text display with 2x16 signs.
o
Evaluation of interface signals for remote control, diagnosis and configuration of the parameters
of the door