TST
Assembly instructions
FUZ2 -A/-B/-C/-CX/-L
FEIG ELECTRONIC GmbH
Page 67 of 71
FUZ2-A-B-C-CX-L_Montageanleitung_GB
_10.docx
Drive output
Version
–A / -B / -C / -CGH
for drives up to 0.75 KW at 230 V
Motor constant current at 100% duty factor and 40°C
ambient temperature: 3 A
Motor current at 40% duty factor and 50°C ambient
temperature: 5 A
Max. length of motor cable: 30 m
Overload for 0.5 s: 10 A
Drive output
Version -CX / -CXGH
for drives up to 1.2 kW at 230 V
Motor constant current at 100% duty factor and 40°C
ambient temperature: 5 A
Motor current at 40% duty factor and 50°C ambient
temperature: 8 A
Max. length of motor cable: 30 m
Overload for 0.5 s: 16 A
Drive output
Version -LGH
for drives up to 1.5 kW at 230 V
Motor constant current at 100% duty factor and 40°C
ambient temperature: 8 A
Motor current at 40% duty factor and 50°C ambient
temperature: 10 A
Max. length of motor cable: 30 m
Overload for 0.5 s: 20 A
Brake chopper and resistor
Version
–C / –CX / -CGH /
-CXGH / -LGH
Max. 1.5 kW for max. 0.5 seconds
repetition rate min. all 20 seconds
ATTENTION
The heatsink / brakeresistor on the back of the housing
can reach temperatures up to 85° C. In case of failure
this may briefly reach 280 ° C
(< 5 Min.)!
Temperature operating range
-
20…+50°C
Temperature storage range
-
20…+70°C
Relative humidity
up to 95% non condensing
Noise Emission
<20 dB (A)
Protection class
IP54 (only in respect of enclosure)
Weight
approx. 5 kg
Equipment mobility:
stationary
Equipment type:
Motor type external motor is not part of the delivery from
FEIG ELECTRONIC GMBH
Protection class:
Protection class I
