![background image](http://html1.mh-extra.com/html/feig-electronic/tst-fuz2-a/tst-fuz2-a_assembly-instructions-manual_548932002.webp)
TST
Assembly instructions
FUZ2 -A/-B/-C/-CX/-L
FEIG ELECTRONIC GmbH
Page 2 of 71
FUZ2-A-B-C-CX-L_Montageanleitung_GB
_10.docx
Notes
Copyright 2015 by
FEIG ELECTRONIC GmbH
Lange Straße 4
D-35781 Weilburg
Tel.: +49 6471 3109 0
Version:2017-06-14
This edition replaces all earlier versions.
The specifications in this document are subject to change without notice.
The transmission and reproduction of this document, and utilization and disclosure of its contents
are not permitted unless expressly authorized. Violations will result in liability for damages. All
rights, including rights created by patent grant or registration of a utility model or design, are
reserved.
This Manual is directed especially at persons involved with commissioning the
TST FUZ2
door controller of
FEIG ELECTRONIC GmbH. The installation and commissioning of the controller shall only be carried out by
officially trained electrical experts who are familiar with the safety standards of electrical drive and
automation technology.
The distributor of the machine is solely responsible for the completeness of the operating instructions for the
machine (in this case the door). The installation instructions for the door controller that is installed by the
manufacturer of the door shall be supplied in one of the languages of the European Community that is
accepted by the manufacturer of the machine.
This Manual shows only a small range of the controllers functions and provides no warranty of properties.
Additional functions and descriptions for individual door functions as well as more precise specifications for
the controller and hazard warnings are available in the main description.
The compilation of the information in this document has been done to the best of our knowledge and with
due diligence. FEIG ELECTRONIC GmbH does not warrant the correctness and completeness of the
information in this document. In particular, FEIG ELECTRONIC GmbH cannot be held liable for
consequential damages due to incorrect or incomplete information.
In spite of the best efforts, mistakes cannot be avoided completely and we will always gratefully accept any
information in this respect.
The installation recommendations contained in this document presume favorable general conditions.
FEIG ELECTRONIC GmbH assumes no liability for the proper operation of the equipment in third-party
environments.
FEIG ELECTRONIC GmbH provides no warranty that the information in this document is not subject to
foreign copyrights. By furnishing this document, FEIG ELECTRONIC GmbH does not grant any licenses to
its own or foreign patents or any other intellectual property rights.
Only the direct contracting parties shall be entitled to warranty claims against FEIG ELECTRONIC GmbH;
warranty claims are non-transferable. The warranty covers only products supplied by FEIG ELECTRONIC
GmbH. There are no express warranties except as listed above.
The description of the products, their utilization, capabilities and performance specifications shall not be
considered as warranted properties and are subject to technical change.