Fayat Group Bomag MPH 122-2 Скачать руководство пользователя страница 87

Страница: 87 / 198

Operation of binder dosing system

BOMAG

MPH 122-2

5.3

Starting work with emulsion

On the tank vehicle set a pressure of approx.
0.5 bar.

Danger

Danger of burning!

Check immediately that all hoses, hose cou-
plings as well as taps and pipelines are leak
tight.

In case of leaks shut down the system immedi-
ately.

The system must only be restarted after the
cause of auf the fault has been determined and
rectified.

Venting the system

Fig. 181

Main switch (b) (Fig. 181) in On-position

Set the selector switch for foam bitumen/emul-
sion (d) to position "Emulsion".

Fig. 182

Check whether the thermal oil temperature (f)
(Fig. 182) has reached the nominaöl value.

Danger

Maximum thermal oil temperature for emul-
sion: 80 °C!

Fig. 183

On the potentiometer for binder quantity (m)
(Fig. 183) adjust a flow rate of approx. 50 l/min.

Set the selector switch for spraying/circulation
(k) to position "Spraying".

Open the middle spraying section (n).

Содержание Bomag MPH 122-2







































































































































































































Результаты поиска

Содержание Bomag MPH 122-2

Отзывы:

Fayat Group Bomag MPH 122-2, Инструкция по эксплуатации и обслуживанию, Страница: 87 / 198

Результаты поиска

Содержание Bomag MPH 122-2

Отзывы: