Fayat Group Bomag MPH 122-2 Скачать руководство пользователя страница 112

Страница: 112 / 198

Every 10 operating hours

BOMAG

112

MPH 122-2

Environment

Catch running out fuel, do not let it seep into
the ground.

Shut down the engine.

Fig. 206

Clean the area around the filler opening (Fig.
206).

Unscrew the fuel tank cover.

Caution

Contaminated fuel can cause malfunction or
even damage of the engine.

If necessary, fill in fuel through a funnel with
screen.

Top up with fuel (diesel or winter diesel).

Screw the fuel tank cover back on.

6.8

Checking the hydraulic oil
level

Caution

In hydraulic systems filled with Panolin HLP
Synth.46 use always the same oil to top up.
With other ester based oils consult the lubrica-
tion oil service of the respective oil manufac-
turer.

Caution

If, during the daily inspection of the oil level
the hydraulic oil level is found to have
dropped, check all lines, hoses and compo-
nents for leaks.

Fig. 207

Check the hydraulic oil level in the inspection
glass (Fig. 207).

Note

At a room temperature of approx. 20 °C the oil lev-
el should reach approx. 2/3 way up the inspection
glass.

If the oil level is too low top up hydraulic oil im-
mediately.

For quality and quantity of oil refer to the "table
of fuels and lubricants".

Содержание Bomag MPH 122-2







































































































































































































Результаты поиска

Содержание Bomag MPH 122-2

Отзывы:

Fayat Group Bomag MPH 122-2, Инструкция по эксплуатации и обслуживанию, Страница: 112 / 198

Результаты поиска

Содержание Bomag MPH 122-2

Отзывы: