Fayat Group Bomag MPH 122-2, Инструкция по эксплуатации и обслуживанию, Страница: 7 / 198

Table of Contents
BOMAG 7 MPH 122-2
6.44 Check the anti-freeze concentration and the condition of the coolant 155
6.45 Intercooler, draining off oil/condensation water 156
6.46 Check the fastening of engine / turbocharger / combustion air hoses 156
6.47 Checking the crankcase pressure 157
6.48 Oil change in front travel gear 158
6.49 Oil change in rear planetary gear 159
6.50 Change the oil in the rear axle reduction gear 160
6.51 Oil change in rear axle 161
6.52 Oil change in attachment plate exciter housing 162
6.53 Change the additional fuel filter 163
6.54 Changing the thermal oil 163
6.55 Compressor oil change 164
6.56 Changing hydraulic oil and breather filter 165
6.57 Change the hydraulic oil fine filter 167
6.58 Changing the coolant 168
6.59 Tightening the screws on the articulated joint 169
6.60 Checking the fire extinguisher . 170
6.61 Changing the injection valve 171
6.62 Replacing the crankcase ventilation valve 173
6.63 Changing the coolant pump 173
6.64 Changing the pressure retaining valve on te injection pump 174
6.65 Cleaning, changing the dry air filter cartridge 175
6.66 Replacing the cutting teeth/cutting tooth holders 177
6.67 Grease the bearings of the lift cylinder for the cabin 181
6.68 Water sprinkler system, maintenance in the event of frost 182
6.69 Change the fresh air filter in the cabin 183
6.70 Fill the provision tank for the windscreen washer system 183
6.71 Change the tires 184
6.72 Lubricate the attachment plate adjustment spindles 185
6.73 Cleaning the bitumen filter 186
6.74 Reaction water tank, maintenance in the event of frost 187
6.75 Tightening torques for screws with metric unified thread 187
6.76 Conservation 188
Trouble shooting 189
7.1 General notes 190
7.2 Engine problems 191
7.3 General notes on diagnostic push button and control light 194
7.4 Air conditioning system faulty 195
7.5 Faults in binder dosing system 196