Fayat Group Bomag MPH 122-2 Скачать руководство пользователя страница 104

Страница: 104 / 198

Maintenance

BOMAG

104

MPH 122-2

6.4

Running-in instructions

The following service work must be performed
when taking new machines into operation.

Caution

Up to approx. 250 operating hours check the
engine oil level twice every day.

Depending on the load the engine is subjected
to, the oil consumption will drop to the normal
level after approx. 100 to 250 operating hours.

After a running time of 15 minutes retighten
the V-belts for generator and air conditioning
compressor

Maintenance after 50 operating hours

Change engine oil and oil filter cartridge.

Change all fuel filters.

Retighten bolted connections on intake and
exhaust tubes, oil sump and engine mounts.

Retighten all bolted connections on the ma-
chine.

Maintenance after 250 operating hours

Change the oil in the front drive gears.

Change the oil in the planetary drives of the
rear axle

Change the oil in the rear axle reduction gear

Change the oil in the rear axle.

Maintenance after 500 operating hours

Change the oil in the front drive gears.

Change the oil in the planetary drives of the
rear axle

Special intervals

Switch the air conditioning on every month for
about 10 minutes.

Optional equipment

Содержание Bomag MPH 122-2







































































































































































































Результаты поиска

Содержание Bomag MPH 122-2

Отзывы:

Fayat Group Bomag MPH 122-2, Инструкция по эксплуатации и обслуживанию, Страница: 104 / 198

Результаты поиска

Содержание Bomag MPH 122-2

Отзывы: