Fayat Group Bomag MPH 122-2 Скачать руководство пользователя страница 139

Страница: 139 / 198

Every 500 operating hours

BOMAG

139

MPH 122-2

6.35 Servicing the generator V-

belt

Danger

Danger of injury!

Work on the V-belt drive must only be per-
formed with the engine shut down.

Check the V-belt

Fig. 273

Inspect the entire circumference of the V-belt
(Fig. 273) visually for damage and cracks. Re-
place damaged or cracked V-belts.

Check the V-belt tension

Note

A belt tension meter is required to check the V-belt
tension.

Fig. 274

Lover the indicator arm (1) (Fig. 274) into the
measuring unit.

Rest the guide (3) on the V-belt (2) between
two belt pulleys. The stop should abut against
the side.

Evenly press the button (4) under a right angle
to the V-belt (2), until the spring engages audi-
bly and noticeably.

Lift the meter carefully without changing the
position of the indicator arm (1).

Read the measuring value at the intersecting
point (arrow), scale (5) and indicator arm (1).

Retighten the V-belt

Fig. 275

Loosen screws (2) (Fig. 275).

Tighten the screw (1) clockwise, until the re-
quired belt tension is reached.

Retighten screws (2).

Содержание Bomag MPH 122-2







































































































































































































Результаты поиска

Содержание Bomag MPH 122-2

Отзывы:

Fayat Group Bomag MPH 122-2, Инструкция по эксплуатации и обслуживанию, Страница: 139 / 198

Результаты поиска

Содержание Bomag MPH 122-2

Отзывы: