Fayat Group Bomag MPH 122-2 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 198

Fayat Group Bomag MPH 122-2 Скачать руководство пользователя страница 3

Foreword

BOMAG

3

MPH 122-2

F orew ord

These BOMAG machines are products from
the wide range of BOMAG machines for earth
work, asphalt and refuse compaction as well
as stabilizers/recyclers.

BOMAG’s vast experience in connection with
state-of-the-art production and testing meth-
ods, such as lifetime tests of all important
components and highest quality demands
guarantee maximum reliability of your ma-
chine.

This manual comprises:

l

Safety regulations

l

Operating instructions

l

Maintenance instructions

l

Trouble shooting

Using these instructions will

l

help you to become familiar with the machine.

l

avoid malfunctions caused by unprofessional
operation.

Compliance with the maintenance instructions will

l

enhance the reliability of the machine on con-
struction sites,

l

prolong the lifetime of the machine,

l

reduce repair costs and downtimes.

BOMAG will not assume liability for the function of
the machine

l

if it is handled in a way not complying with the
usual modes of use,

l

if it is used for purposes other than those men-
tioned in these instructions.

No warranty claims can be lodged in case of dam-
age resulting from

l

operating errors,

l

insufficient maintenance and

l

wrong fuels and lubricants.

Please note!

This manual was written for operators and mainte-
nance personnel on construction sites.

Always keep this manual close at hand, e.g. in the
tool compartment of the machine or in a specially

provided container. These operating and mainte-
nance instructions are part of the machine.

You should only operate the machine after you
have been instructed and in compliance with these
instructions.

Strictly observe the safety regulations.

Please observe the applicable accident prevention
instructions.

For your own personal safety you should only
use original spare parts from BOMAG.

In the course of technical development we re-
serve the right for technical modifications
without prior notification.

These operating and maintenance instructions are
also available in other languages.

Furthermore, the spare parts catalogue is availa-
ble from your BOMAG dealer against the serial
number of your machine.

Your BOMAG dealer will also supply you with in-
formation about the correct use of our machines.

The above notes do not constitute an extension of
the warranty and liability conditions specified in the
general terms of business of BOMAG.

We wish you successful work with your BOMAG
machine.

BOMAG GmbH

Printed in Germany

Copyright by BOMAG

«
1
2
3
4
5
...
»

Содержание Bomag MPH 122-2







































































































































































































Отзывы:

Нет отзывов