Fayat Group Bomag MPH 122-2 Скачать руководство пользователя страница 81

Страница: 81 / 198

Operation

BOMAG

MPH 122-2

Fig. 171

Tie the machine down on the transport vehicle,
use the lifting eyes and the towing hitches (Fig.
171) on front and rear frame for this purpose.

Caution

After transport release the articulation lock
again and store it in the receptacle.

Fig. 172

After the transport fold the rain hoods (Fig.
172) back up.

Secure the rubber bracket in working position.

4.24 Final shut-down of machine

If the machine can no longer be used and needs to
be finally shut down you must carry out the follow-
ing work and have the machine disassembled by
an approved specialist workshop.

Environment

Catch all fuels and lubricants, do not let them
seep into the ground and dispose of in compli-
ance with legal regulations.

Remove the batteries and dispose off accord-
ing to legal regulations.

Empty the fuel tank.

Drain the hydraulic oil tank.

Drain coolant from engine and cooling system.

Drain off engine and transmission oil

Danger

Danger of explosion!

Parts that previously contained combustible
fluids must not be cut with a cutting torch.

Содержание Bomag MPH 122-2







































































































































































































Результаты поиска

Содержание Bomag MPH 122-2

Отзывы:

Fayat Group Bomag MPH 122-2, Инструкция по эксплуатации и обслуживанию, Страница: 81 / 198

Результаты поиска

Содержание Bomag MPH 122-2

Отзывы: