Fagor 8025 T CNC, Руководство по эксплуатации

Страница: 71 / 309

46 8025/8030 CNC OPERATING MANUAL
SPECIAL ASSISTED PROGRAMMING
During the edition of a canned cycle, whenever the corresponding preparatory function
key has been pressed, when the [HELP] key is pushed, the information corresponding to
this canned cycle will appear directly on the screen highlighting the parameter to be
introduced.
Once the value has been introduced and in order to be able to continue with the edition of
new parameters, it is necessary to press the ENTER key.
If it is not required to program any parameter, as long as it is not obligatory to do so, the
DELETE key must be pressed.
As in the case of normal programming, the CL key deletes one character at a time and the
DELETE key deletes the whole value given to the current parameter.
At any time during this type of programming, if the [HELP] function key is pressed, the
control changes over to the normal assisted programming.
3.6.7.4. Copying a program.
This feature allows an existing program to be copied in the CNC memory, by designating
it a number which is different from the original.
To do this, first the [PROGram DIRectory] and then the [COPY] key.
The CNC will ask which number is that of the source program and which is the one for the
new program. After keying in each of them the ENTER key must be pressed.
Should there be no number keyed in as the original program, as there is another program
with the same number in the memory and the one keyed in as being new, or if there is not
sufficient memory in the CNC, a message will be displayed indicating the cause.