Fagor 8025 T CNC, Руководство по эксплуатации

Страница: 115 / 309

8025/8030 CNC PROGRAMMING MANUAL 1
1. OVERVIEW
The CNC can be programmed both from its front panel and from external peripherals (tape
reader, cassette reader/recorder, computer etc.). The memory capacity for part programming
is 32K characters
In this CNC the part programs can be entered in four different operating modes:
OPERATING MODE 2 - PLAY BACK
OPERATING MODE 3 - TEACH IN
OPERATING MODE 6 - EDITING
OPERATING MODE 7 - INPUT-OUTPUT
In mode 7, the programs are transferred to the CNC from any external peripheral (RS 232
C). In the other modes, the programs are entered directly from the front panel of the CNC.
This means that the programming can be carried out both at the machine and at a remote
location, e.g. in a programming office.
In the PLAY BACK mode, the axes are shifted manually (Jog) and the coordinates
reached are then entered as the program coordinates.
In the TEACH IN mode, a block is written and executed and then entered as part of the
program.
In the EDITING mode, the complete program is recorded and then executed.
1.1. EXTERNAL PROGRAMMING
If the programming is to be carried out by means of an external peripheral, ISO code must
be used.
% will initiate the program, followed by the program number (five digits, followed by the
characters, RT or LF and the N of the first block). RETURN or LINEFEED must be used
after each block prior to the N of the beginning of the following block.
To end the program the characters ESCAPE (ESC) or END OF TAPE (EOT) or a series
of 20 nul characters (ASCII 00) must be used.