Fagor 8025 T CNC, Руководство по эксплуатации

Страница: 73 / 309

48 8025/8030 CNC OPERATING MANUAL
3.7.2. Entering a program from the FAGOR cassette recorder (0)
- Press the 0 key. The screen will display:
PROGRAM NUMBER: P
- Key in the number of the program to be received in. If 99999 is entered, the CNC gets
ready to accept machine-parameters, the decoded M’s functions table and the table of
leadscrew compensation parameters.
Should a PLC I be fitted, the PLC user program will be kept together with the above.
- Press ENTER. Four possibilities:
a) A program exists in the control’s memory with the same number. The screen will
display:
ALREADY EXISTS IN MEMORY
DELETE? (N/Y)
If deletion is not wanted:
- Press any key other than Y. Return to the state in section 3.7.1.
If deletion is wanted:
- Press Y. The screen will display:
PROGRAM NUMBER: P —— DELETED
From this moment the program starts to be transferred from the cassette, taking place
as described in possibility c).
b) The program selected does not exist on the tape.
On starting to transfer from the cassette, if the program does not exist on the tape:
DOES NOT EXIST IN THE CASSETTE
- Press [CONTINUE]. It returns to the status of section 3.7.1. or,
- Press OP MODE. The operating mode menu will appear.