Fagor 8025 T CNC, Руководство по эксплуатации

Страница: 191 / 309

8025/8030 CNC PROGRAMMING MANUAL 77
BASIC OPERATION
The movements of the axes during a probing cycle are:
Approach
It is executed in rapid mode G00 from the starting point of the cycle to a safety distance
P3 away from the theoretical value.
Probing
It is executed at a feedrate determined by P4 until the CNC receives the probe signal. If
before moving a maximum distance of 2P3 the CNC has not received the probe signal,
error 65 will be displayed and all axes will be stopped.
The CNC will not display the movement of the axis until it receives the probe signal and
the FEEDRATE knob will have no effect on the feedrate which will be fixed at 100%
Withdrawal
Once the probing corresponding to selected cycle is finished, the axes will withdraw, in
rapid move G00, back to the starting point.
Depending on the selected cycle, the CNC will update, if necessary, the tool table, by the
same token, the values of the arithmetic parameters will have a specific meaning which
will be described in the sections for each cycle.
To access the parameter table while on AUTOMATIC, SINGLE BLOCK, TEACH-IN
or DRY RUN,
key in: [PARAMETERS]
and press the arrow keys until the desired parameter is displayed.