BAG E
REAR SUSPENSION
E1)
Install a 3/8” ball stud in the land on each side of the bulkhead. Here we
have used the outer, #2 holes. We suggest you place a flat washer and
#4 nut under the stud to reduce stress on the bulkhead.
E2)
Take the control arms (XF3012) from Bag E and remove the
gurfelmurgles. A pair of pliers and a twisting motion seems to work best.
E3)
The two arms are identical; when the arms are assembled to the truck, the
shocks mount on the rear. However, we reverse the AE hub carriers,
putting the right carrier (marked with an “R”) on the left arm and the left
carrier (marked with an “L”) on the right arm. This makes the camber links
line up better.
L
R