G10) Cut off the top bumper mounts just above the middle mounting hole. We
leave the gusset on the mount. If you use a rotary tool for this, always
wear safety goggles.
G11) Re-install the top bumper mounts just
as they came off using the same bolts.
You can throw away the front part which
you cut off.
G12) Install the bumper on the bumper
mount using four 4-40 X 5/8” cap head
screws.
That’s it! We’re done!
Check Paul’s Race Prep & Tuning Sections, then Let’s hit the track!