ASSEMBLE THE SCX – 60CF TRANSMISSION
A13) Remove the transmission case
(XF5001) from Bag A and separate the
two halves. Note the small round ejector
pin bosses on the mounting tabs. You
may wish to file these flat for ease of
installation in the truck.
A14) Install a 3/16” X 3/8” rubber sealed bearing
(XF6200) all the way into the top shaft
boss in the left transmission case half
(short arrow) and a 3/8” X 5/8” rubber
sealed bearing in the boss for the
differential. The Team pushes them in
with the shank of an Allen driver or, better
yet, with a socket. See Inst. A16.
A15) Make sure the spacer (AE9602) is on the top shaft (AE9601) and slide the
shaft with spacer through the bearing in the transmission case. If your top
shaft is worn, you will want to try our one-piece steel top shaft (XF5210)
made for us by M.I.P. No more spacer to lose and longer wearing too!