F4)
Assemble the antenna mount (XF9001) to the top deck (XF1501). The
bottom of the top deck is the side with two counter-sunk holes which are
used if you have the DDP023 transmission brace (left photo). If you have
the brace, put the bracket on the top deck using these holes. For the
antenna mount, use two 4-40 X 1/2” bolts coming up from the bottom of
the deck, put the antenna mount over the bolts, and secure with two 4-40
locking
nuts.
F5)
A note here: If the antenna wire touches
any carbon fiber part, the result could be
glitching, so we must keep the wire off the
CF. When you install the antenna tube,
be certain a portion of tube protrudes
below the top deck.
F6)
Most Team drivers do not install the top deck yet; they do this after the
electronics are in. The top deck is held in with seven 4-40 X 3/8” cap
head screws.