8)
Remove the three flat-head screws and counter-sink washers which hold
the top plate to the chassis. The entire front end and steering assembly
should now come off the SC 10 as a unit. Save the assembly, screws &
washers for re-use.
REAR END
9)
Remove the four aluminum cap head
screws that hold the rear body mount.
Keep the body mount, but the aluminum
screws will not be needed.
Note: We suggest you discard all aluminum
screws on the truck and replace them with
steel. Not only is the aluminum weak, but it
tends to break when threaded into carbon.
10)
Remove the two flat head screws holding
the rear bumper to the shock tower.