BAG B
NOSE PIECE
B1)
Thread the four 4-40 X 5/8” flat head screws up from the bottom of the
chassis through the outside front holes.
B2)
Place the nose bridge spacers (XF1531) over the screws from B1 above.
B3)
Place the nose bridges (XF 1530 long arrows) over the spacers & screws
and secure with locking nuts (XF6071 short arrows).
B4)
Take the nose piece (XF1002) out of
Bag B and check it for flashing,
especially at the rear and on top of the
post. We need good snug fit with the
chassis and especially where the top
deck fits on the post.
