using the 0.060” shims.
D8)
Place the four shims on the four posts of
the cradle and put the transmission into the
cradle. Be sure the shims stay in place
(bottom photo) and the motor plate lines up
correctly with its bracket (right photo).
D9)
We’ll do the easy one first. Place a flat
washer on a 4-40 X 3/8” cap head bolt,
insert the bolt through the hole in the
right front transmission tab, through the
shim, and screw it finger tight into the
cradle.
D10) In the rear, place flat washers over the
two studs which should protrude
through the rear transmission tabs.
The shims should be in place. Install
the two 4-40 mini locking nuts.