E4)
Let’s do the left arm first. Check the set-up sheet and tuning section to
determine whether you will mount the hubs rear, middle, or forward. Here
we show the middle position. Begin sliding the hinge pin through the outer
end of the control arm, and place one shim on the pin.
E5)
Put the
right
hub carrier on the hinge
pin.
E6)
Put another spacer between the hub carrier and the arm, then slide the pin
the rest of the way through.
E7)
Install the 2-56 X 1/8” button head screw to secure the hinge pin. (Now
where did you put that little thing???)
