4)
Remove the nerf bars by unscrewing
the four button head screws from
beneath the chassis. Then use a flat
blade screw driver to pry up from the
bottom. Save the bars & screws for
re-use.
5)
From beneath the chassis, remove
the four cap head screws which hold
the nerf bar to the front bumper.
Save the bar and screws for re-use.
If you put the screws a few turns back
into the bars, they’ll be right where
you need them later.
6)
From beneath the chassis, remove the
two flat head screws which hold the
front bumper to the bulkhead. Save
the bumper and screws for re-use.
7)
Still working beneath the chassis,
remove the two flat head screws
which hold the bulkhead to the
chassis. Save these screws for re-
use.