Future Gothic Components
B08-FG-xxx
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue.
Please use knives with due care and remember to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
These instructions cover all the components which form part of our Future Gothic range.
Walls / Windows
Each wall / window is formed from two pieces as
shown above.
Glue the base to the bottom of the wall / window.
To create multiple layers, simply slot the top window
on to the bottom window.
Tall Columns
Each large column is formed from the pieces shown
above.
Glue two of the inner supports in place.
