Eurotherm 6100, Руководство пользователя

Страница: 229 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
HA029324
Issue 11 Oct 14 Page 213
4.6.7 Job search
With multiple job sources, it can sometimes be diffi cult to discover what the trigger for a particular job is,
particularly if the recorder has been confi gured by more than one operator. The ‘Job Search’ facility al-
lows the user to defi ne a job type, and the recorder then produces a list of relevant triggers. Figure 4.6.7
shows a typical search page, which will produce a list of all triggers for Preset Totaliser jobs.
Search Results
C h a n n e l s ( 1 ) , A l a r m ( 1 ) , J o b ( 3 )
C h a n n e l s ( 3 ) , A l a r m ( 3 ) , J o b ( 1 )
C h a n n e l s ( 6 ) , A l a r m ( 4 ) , J o b ( 1 )
Maths (1), Alarm (2), Job (3)
Ok
Search Now
All Sections
Totaliser
Preset
Section
Job Category
Job Action
Figure 4.6.7a Job search
Section Allows the user to select a point type for the search. For example, selecting ‘Maths’,
causes the search to be restricted to Maths channels. ‘All Sections’ causes all enabled
point types to be included in the search.
Job Category Allows a job category (e.g. ‘Totaliser’) to be selected for the search.
Job Action This depends on the job category. For example, for ‘Totalisers’, ‘Preset’, ‘Disable’, Pre-
set Group’ or ‘Disable Group’ to be selected.
Section 4.7 gives details of all job types
and their associated actions.
Search Now Operation of this button initiates the search, after confi rmation.
SEARCH RESULTS
The search results in one of two displays, one ‘No Match was found’ if no jobs are found which match the
search criteria, or a list of trigg ers is produced. A typical example is given in fi gure 4.6.7b.
Figure 4.6.7b Search results (typical)