Eurotherm 6100, Руководство пользователя

Страница: 111 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
HA029324
Issue 11 Oct 14 Page 95
4.3.10 BATCH CONFIGURATION (Cont.)
OPERATOR INITIATION (Cont.)
‘Values’ can now be entered for these headings by entering strings of up to 60 characters (including
spaces).
This may be done done by touching the empty fi eld and using the resulting pop-up keyboard to type-in
the entry, or by touching the fi eld continuously for two seconds or more and then selecting one of the
predefi ned Batch Entry messages previously entered in the
confi guration page . In the latter case, the
predefi ned message may be edited in the normal way before being Applied. Such editing has no effect
on the original message.
Once the entries are complete, operation of the Start button initiates batch recording. Operation of the
Store button saves the confi guration for later initiation by job, by counter or
via MODBUS/TCP.
The Values entry page is replaced by the batch status page (fi gure 4.3.10c), this time showing details of
the batch in progress. This page allows the batch to be stopped or a new one triggered.
Note: Text may also be entered using a suitable keyboard connected via the USB port at the rear
of the instrument (
section 2.1 ).
Batch Number:
Customer Name:
Operator name:
Supervisor:
Batch - Furnace1 Temps
Start Close Store
060509.015
FishesRus
Marvin
00:0A:8D:00:20:A0
FishesRus
Marvin
Arthur
Tricia
Fred
Manky Clothes Ltd.
Rat's Nest Hair Co.
Batch Entry list.
Appears if batch entry area is touched
continuously for 2 seconds (approx).
List entries are made in Batch Config-
uration.
These keys not shown whilst the Batch
Entry list displayed
Figure 4.3.10b Batch values entry page