Eurotherm 6100, Руководство пользователя

Страница: 235 / 397

100/180MM DISTRIBUTED GRAPHIC RECORDER: USER GUIDE
HA029324
Issue 11 Oct 14 Page 219
4.7.3 Message category
One or more messages ( section 4.3.8 ) can be directed to the display, to ‘All groups’ or to a ‘Specifi ed
Group’. The messages must be contiguous - e.g. messages 2, 3 and 4 may be sent, but messages 1, 3
and 4 cannot be sent, without message 2 as well.
Job Number
Action
Category
Math
On
Math 1
1
Math
Reset
Active
Select 'Reset', 'Disable'
'Switch to B' or 'Trigger'
Select Required Maths channel
Select 'Active', 'Inactive',
or 'Acknowledgement'
Figure 4.7.3 Message job menu layout
4.7.4 Maths category
If Maths channels ( section 4.3.11 ) are enabled, the following jobs become available to applicable func-
tions:
Reset Sets the selected maths channel value to zero.
Disable Stops historical functions such as Fvalue, Stopwatch and Rolling Average from accumulating fur-
ther values. When the function is subsequently re-enabled, the function re-starts from its pre-
disabled value. ‘Disable’ has no effect on other functions.
Switch to B Causes the relevant maths channel to copy source B instead of its normal source A - see section
4.3.11 for further details.
Trigger Used to initiate a ‘Sample and hold’ function - see section 4.3.11 for further details.
Figure 4.7.4 Maths job menu layout
Select 'Display', 'All Groups', or 'Specified Group'
Job Number
Send Message(s) to
Category
First Message
Last Message
Group
Select Required Group
(only if 'Specified Group' previously selected)
Select range of messages to be output.
On
Select 'Active', 'Inactive' or 'Acknowledgement'
1) Message 1
1
Message
Specified Group
1) Group 1
1) Message 1
Active