Ericsson EDA 2530 Скачать руководство пользователя страница 167

Страница: 167 / 200

EDA 2530 Commissioning Procedure for Cable and Wireless Access

1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01

Ericsson AB 2010

Commercial in confidence

167 (200)

b. Set

the

Slot:

box to the SHDSL card slot to be re-enabled.

c. Select

the

Enable

radio button.

Click on the

button. Wait for all 32 lines to be enabled.

Check the result is Found (Configured); 32 Updated: 32 Failed: 00.

If there are any failures click on the

View Error Log

button and read the

display. Any disabled lines will have to be enabled manually.

f. Select

the

Check

radio button.

Click on the

button. Wait for all 32 lines to be checked.

Check the result is Found (Configured); 32 Enabled: 32 Disabled: 00.

If there are any lines Disabled, click on the

View Error Log

button and read

the display. Any disabled lines will have to be enabled manually.

9.2.1.4

Enable or Disable an SHDSL Line Manually (For Reference Only)

This Section is only required if an SHDSL line needs to be manually Enabled or
Disabled.

Place the cursor on the <

32 x SHDSL unit >

to be configured.

Right click on the unit and select

Lines

from the menu.

Содержание EDA 2530









































































































































































































Результаты поиска

Содержание EDA 2530

Отзывы:

Ericsson EDA 2530, Инструкции по вводу в эксплуатацию, Страница: 167 / 200

Результаты поиска

Содержание EDA 2530

Отзывы: