Epson DS-790WN, Руководство пользователя

Страница: 229 / 253

Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏
The wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏
The current Wi-Fi connection was established by pressing a button on the wireless router.
Note:
If you cannot find the button or you are setting up using the software, see the documentation provided with the wireless
router.
1.
Tap on the home screen.
2.
Select Router .
3.
Tap
Start Setup
.
If the network connection is already set up, the connection details are displayed. Tap Change to Wi-Fi
connection. or Change Settings to change the settings.
4.
Select Push Button Setup(WPS) .
5.
Follow the on-screen instructions.
If you want to check the network connection status for the scanner after setup is complete, see the related
information link below for details.
Note:
If connection fails, restart the wireless router, move it closer to the scanner, and try again.
Related Information
&
“Checking the Network Connection Status” on page 230
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to a wireless router by using a PIN code. You can use this method to set up if an
wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless
router.
1.
Tap on the home screen.
2.
Select Router .
3.
Tap Start Setup .
If the network connection is already set up, the connection details are displayed. Tap Change to Wi-Fi
connection. or Change Settings to change the settings.
4.
Select
Others
>
PIN Code Setup(WPS)
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Making Wi-
…
229