Endress+Hauser Teqwave F, Руководство по эксплуатации

Страница: 39 / 80

Teqwave F/I Modbus TCP Commissioning
Hauser 39
2. Settings menu → "Application parameters" → "Relay output" → "Settings" → "Select
measured value" → "Switch point Max"/"Switch point Min" or "Switch point"
3. Settings menu → "Application parameters" → "Relay output" → "Settings" → "Select
measured value" → "Hysteresis"
4. Settings menu → "Application parameters" → "Relay output" → "Settings" → "Select
measured value" → "NC contact/NO contact"
5. Settings menu → "Application parameters" → "Relay output" → "Output"
Navigation using the Viewer
1. Menu "Teqwave Transmitter" → "Relay output" → "Select measured variable" → "Output
mode"
2. Menu "Teqwave Transmitter" → "Relay output" → "Select measured variable" → "Switch
point Max"/"Switch point Min" or "Switch point"
3. Menu "Teqwave Transmitter" → "Relay output" → "Select measured variable" →
"Hysteresis"
4. Menu "Teqwave Transmitter" → "Relay output" → "Select measured variable" → "NC
contact/ NO contact"
5. Menu "Teqwave Transmitter" → "Relay output" → "Output"
The operating tool communicates the settings to the transmitter as soon as the Apply
button is clicked.