Endress+Hauser Teqwave F, Руководство по эксплуатации

Страница: 69 / 80

Teqwave F/I Modbus TCP Technical data
Hauser 69
Current output 4 to 20 mA / voltage output 0 to 10 V
Function Can be configured as a current output or voltage output, as required
Version Galvanically isolated
Open-circuit voltage DC 15.5 V
Suspend time Configurable: 0 to 10 000 s
Assignable measured
variables • Off
• On
• Concentration 1-2
• Temperature
• Speed of sound
• Dispersion
• Density (optional)
• Suspend measurement
Current output 4 to 20 mA
Maximum output
value 20 mA
Load 0 to 500 Ω
Resolution 1.5 µA
Voltage output 0 to 10 V
Maximum output
value 10 V
Load > 750 Ω
Resolution 1 mV
Relay output
Function Relay output
Version Relay output, galvanically isolated
Maximum switching capacity AC/DC 50 V, 1 A
Switching behavior • NC contact
• NO contact
Assignable functions • Off
• On
• Limit value (can be configured as a range or trigger value, as required):
• Concentration 1 to n
• Temperature
• Speed of sound
• Dispersion
• Density
Signal on alarm Breakdown information and failsafe mode of the outputs are configurable →  43.
Ethernet (Modbus protocol)
Status bit Diagnostics information via status bits