Endress+Hauser Teqwave F, Руководство по эксплуатации

Страница: 18 / 80

Installation Teqwave F/I Modbus TCP
18 Hauser
6.2.2 Mounting the transmitter
1 2
A0035459
 7 Mounting the transmitter
1 DIN rail holder
2 DIN rail according to DIN EN 60715 TH 35
Mount the transmitter on the DIN rail using the DIN rail holder.
6.3 Post-mounting check
Perform the following checks once you have installed the measuring device:
Device condition and specifications Notes
Is the device damaged (visual inspection)? 
Does the device meet the specifications, such as:
• Ambient temperature
• Nominal pressure
• Measuring range →  68 
Installation Notes
Is there a sufficient distance between the sensor and the next pipe elbow? →  16 
Teqwave I: Is the active sensor area fully immersed in the liquid? →  16 
If installing Teqwave I in a pipe:
Is the black dot on the process connection aligned with the flow direction? →  68 
If installing Teqwave I in a horizontal position:
Align the dot on the process connection so that it points either up or down? →  68 
Process environment/process conditions Notes
Are the specifications for the inlet run observed?
Inlet run ≥ 10 × DN 
Are the specifications for the outlet run observed?
Outlet run ≥ 5 × DN 
Is the measuring device protected against precipitation and direct sunlight? 