Endress+Hauser Teqwave F, Руководство по эксплуатации

Страница: 12 / 80

Product description Teqwave F/I Modbus TCP
12 Hauser
3.1.2 Transmitter
1
3 4 5
2
3
A0035452
 2 Transmitter versions
1 Transmitter with LED status indication
2 Transmitter with a touchscreen
3 Push-pull connection for connecting to the sensor
4 Terminal strip with supply voltage, analog output, relay output and digital input
5 Ethernet interface for digital signal transmission ("Teqwave Viewer" operating tool and Modbus protocol)
3.1.3 Concentration apps
A concentration app contains specific configurations for the measurement of a certain
liquid and, along with the measured sensor signals, is used as the basis for calculating the
concentration. Hauser provides a separate concentration app for every type of
fluid.
The concentration app is a file with lmf format. A list of the available concentration apps is
provided in the Applicator →  67.
If you require a concentration app that is not already listed in the Applicator,
Hauser requires a sample of the fluid to create the concentration app. Every
transmitter can use a maximum of 25 concentration apps.
Concentration apps are individually encoded to work only with the serial number of a
specific transmitter. The transmitter in service uses the serial number saved in the .lmf file
to check whether the concentration app has been specifically configured for use with this
transmitter. If this is not the case, it is not possible to add the concentration app.
The data sheet provided with the concentration app contains information about the fluid,
the permitted measuring ranges and the accuracy of the concentration measurement.