Endress+Hauser Teqwave F, Руководство по эксплуатации

Страница: 48 / 80

Operation Teqwave F/I Modbus TCP
48 Hauser
11 Operation
11.1 Adjusting the operating language
Operating language settings →  34.
11.2 Configuring the local display
Local display settings →  42.
11.3 Reading measured values via the local display
All the current measured values can be read via the operational display of the transmitter
with a touch screen. Once a measured variable is selected, the local display switches to the
graph display. The graph shows the development of the selected measured variable over
time. The graph display format can be adjusted.
11.3.1 Adjusting the graph display format
Navigation using transmitter with touch screen
1. "Select measured variable" → "Graph settings button" → "Time axis"
2. "Select measured variable" → "Graph settings button" → "Y axis" → "Maximum value
[unit]"
3. "Select measured variable" → "Graph settings button" → "Y axis" → "Minimum value
[unit]"
4. "Select measured variable" → "Graph settings button" → "Y axis" → "Auto scale"
Parameter overview with brief description
Parameter Procedure Selection/input Factory setting
Time axis Select the period shown on the X-
axis. • 1 minute
• 10 minutes
• 1 hour
• 4 hours
• 12 hours
• 1 day
• 1 week
• 1 month
• 3 months 1 minute
Maximum Value [unit] Enter the maximum value to be
displayed on the Y axis. Floating-point number with sign • Concentration: depends on the
selected concentration app.
• Temperature: 120 °C (248 °F)
• Speed of sound: 2
000.00
• Density:
1.500 kg/m
3
(3.306 lb/ft
3
)
• Dispersion: 1
Maximum Value [unit] Enter the minimum value to be
displayed on the Y axis. Floating-point number with sign • Concentration: depends on the
selected concentration app.
• Temperature:0 °C (32 °F)
• Speed of sound: 500.00
• Density:
500 kg/m 3 (1 102.311 lb/ft 3 )
• Dispersion: 0
Auto scale Select to enable or disable auto
scaling of the graph. Enable/disable the function The function is enabled