Endress+Hauser Proline Promag 51 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 124

background image

Proline Promag 51

6 Commissioning

Hauser

71

6

Commissioning

6.1

Custody Transfer Measurement

The Promag 51 flowmeter is suitable for custody transfer measurement with cold water. The meas-
uring system operates within a temperature range of 0...+30 °C and can be used, for example, in
drinking water supplies. Examples are given on Page 7. The Promag 51 is operated with a totalizer
display suitable for custody transfer and, optionally, with a pulse output suitable for custody transfer.
Measuring points for custody transfer for water are considered or approved by the certifying author-
ities as “entire plants”. Promag 51 including the inlet and outlet sections are, therefore, considered
as a part of this entire plant. To ensure correct measurement in custody transfer procedures, the pip-
ing and the measuring tube must always be filled with liquid.

When installing a certified measuring system, please also note the regulations for custody transfer
(Deutscher Eichverlag GmbH – Braunschweig):
• Allgemeine Vorschriften (AV) zur Eichordnung (EO)
• Anlage 6 zur Eichordnung (EO 6-1): Vorschriften für Volumen-Messgeräte für strömendes

Wasser

• PTB-A6.1: Volumen-Messgeräte für Kaltwasser

6.1.1

Suitability for custody transfer, custody transfer approval,
reapproval

With flowmeters suitable for custody transfer, approval by the standards authorities has not yet been
carried out. Flowmeters suitable for custody transfer may not be used for custody transfer proce-
dures until approved. However, such flowmeters can either be approved at a later date by a certifi-
cation body or, with the agreement of the authorities, calibrated for custody transfer on site. The
leaded seal of the certified instruments confirms this status.
The operator of an approved Promag 51 measuring system is required to apply for reapproval and
to comply with current regulations set by the standards authorities. The date for reapproval (year
number) is given on a special seal.

!

Note!
• Flowmeters suitable for custody transfer are technically identical to flowmeters approved for

“custody transfer”.

• In contrast to mechanical counters, magnetic flowmeters approved by the standards authorities

may be in continuous operation at Q

max

(= 100%).

• Flowmeters with a max. flow rate of Q > 2000 m

3

/h are exempted from custody transfer

approval. Such instruments are not approved but however can still be used as suitable for custody
transfer measurement.

"

Caution!
Only flowmeters approved by the standard authorities may be used for regulatory fiscal metering.

«
...
69
70
71
72
73
...
»

Содержание Proline Promag 51





























































































































Отзывы:

Нет отзывов

Похожие инструкции для Proline Promag 51

Бренд: Kawai Страницы: 5

Бренд: Jata hogar Страницы: 12

Бренд: Kane Страницы: 12

Бренд: E-line Страницы: 164

Бренд: K-Patents Страницы: 10

Бренд: PAT Страницы: 57

HYGRASREG KH-30

Бренд: S+S Regeltechnik Страницы: 16

Бренд: Nagano Keiki Страницы: 25

ProcessMaster FEP630 series

Бренд: ABB Страницы: 92

Бренд: National Instruments Страницы: 15

Бренд: Garmin Страницы: 22

Бренд: Fluke Biomedical Страницы: 28

Бренд: VOLTCRAFT Страницы: 108

Бренд: Wetekom Страницы: 22

HYDROMETTE HB 30

Бренд: GANN Страницы: 65

Бренд: Kingfisher Страницы: 52

Intelligizer Fence Monitor

Бренд: Zareba Страницы: 8

Бренд: Major tech Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды