Electronics Line iconnect, Руководство по установке

Страница: 102 / 140

Appendix B: Transmitter Installation
iConnect Installation Manual
98
WARNINGS! LIMITATIONS OF SMOKE ALARMS
Wireless smoke alarms are very reliable, but may not work under all conditions. No fire
alarm provides total protection of life or property. Smoke alarms are not a substitute for life
insurance.
Smoke alarms require a source of power to work.
This smoke alarm will not operate and the alarm will not sound if batteries are dead or not
installed properly.
Smoke alarms may not be heard. A sound sleeper or someone who has taken drugs or
alcohol may not awaken if the alarm is installed outside a bedroom. Closed or partially
closed doors and distance can block sound. This alarm is not designed for the hearing
impaired.
Smoke alarms may not always activate and provide warning early enough. Smoke alarms
only activate when enough smoke reaches the alarm. If a fire starts in a chimney, wall, roof,
on the other side of closed doors, or on a different level of the property enough smoke may
not reach the alarm for it to alarm.
Smoke alarms are a significant help in reducing loss, injury and even death. However, no
matter how good a detection device is, nothing works perfectly under every circumstance
and we must warn you that you cannot expect a smoke alarm to ensure that you will never
suffer any damage or injury.
Smoke detectors are not to be used with detector guards unless the combination has been
evaluated and found suitable for that purpose
Keyfobs (EL-4714)
The EL-4714 is a keyfob transmitter designed for use with the iConnect Control System. The EL-4714 is a four-button
keyfob transmitter that offers a number of functions including arm, disarm and SOS Panic.
Figure B- 32: EL-4714 Figure B- 33: Opening the EL-4714’s Casing
Keys Operation and LED Indication
Table B-3: Keys Operation (EL-4714) Table B-4: LED Indication (EL-4714)
Key Operation LED Indication
:
Full Arm Green: Operation successful
:
Disarm Flashing green for 4 seconds: Operation fail
:
Part Arm, HA/PGM Flashing Red for 4 seconds : Low battery
/ :
Perimeter Arm, HA/PGM Flashing amber for 4 seconds: Out of range
+ :
Panic alarm (Press and hold down) Green: Operation successful