7 Devices
iConnect
Installation Manual
35
7.
Devices
This chapter explains how to register devices to the system and define programming options for each device. For
further information on devices, please refer to the installation instructions included with each device.
7.1.
Device Descriptors
You can assign a 16-character descriptor to each device. These descriptors help identify the devices when you operate
and program the system.
To edit a device descriptor:
1.
From the Programming menu, select Devices [91].
2.
Select a device type.
3.
From the device’s sub-menu, select Descriptor.
4.
Edit the descriptor using the alphanumeric keypad.
5.
Press '
√ʹ when you have finished editing.
7.2.
Wireless Devices
7.2.1.
Registering Wireless Devices
For the system to recognize individual devices, each device must be registered to the system. For example, if the device
is a wireless transmitter, registration enables the system to identify the source of a received transmission. Each device
has an individual encrypted ID code. Registering the device to the system familiarizes the system with this code.
It is not necessary to register hardwire detectors connected to Zones 33-34.
To register a device to the system:
1.
From the Programming menu, select Devices [91].
2.
Select the type of transmitter you want to register. For example, if you want to register a wireless detector to a
zone, select Zones.
3.
Select the specific device you want to register (for example, Zone 4); the system initiates Registration mode.
During Registration mode, the system waits for two transmissions from the device.
If a device has already been registered at the selected location, the system will not initiate
Registration mode. If the device has already been registered at another location, attempts to
register it are ignored by the system. Zones 1-32 are intended for wireless detectors by
default, unless the zones 1 to 8 are programmed as wired zones connected to the Wired
Zone Module.
4.
Register the device – refer to each device’s installation instructions in Appendix B for further details.
5.
When two transmissions have been received, Save? is displayed.
6.
Press '
√ʹ to
confirm registration, or ‘Χ’ to cancel.
7.2.2.
Deleting and Deactivating Wireless Devices
When you want to remove a device from the system, you have to delete and deactivate the device. It is important to
delete and deactivate unused devices for two reasons. Firstly, you have to delete a device from the system before you
can register a new transmitter in its place. Secondly, if the device is a wireless detector, it is important to deactivate the
device so that the system will not react to the transmitter’s failure to send supervision signals.
To delete and deactivate a device:
1.
From the Programming menu, select Devices, [91].
2.
Select the type of wireless device you want to delete.
3.
Select the specific device you want to delete.
4.
From the device’s sub-menu, select Delete.
5.
Deactivate the device – refer to each device’s deactivation instructions in Appendix B for further details
6.
Press '
√ʹ to confirm; the device is deleted from the system.
Содержание iconnect
