10 Communications
iConnect
Installation Manual
61
To program the ACK Timeout:
1.
From the Programming menu, select Communications, Comm. Options, ACK Timeout [95406].
2.
Enter a time (001-255 seconds), then press '
√ʹ.
10.6.7.
RDM Period
Remote Diagnostics and Maintenance (RDM) session is a feature that is designed to enable automated maintenance of
installed Control Systems. During a maintenance session, the Control System automatically dials the RP Callback
number and connects to the RDM server. The time interval between maintenance sessions is called the RDM period.
To program the RDM period:
1.
From the Programming menu, select Communications, Comm. Options, RDM Period [95407].
2.
Enter the required RDM period (001-255 days or 000 to disable RDM communication).
10.6.8.
Incoming Calls
This option determines whether the Control System is able to receive incoming Telecontrol/Two-Way Audio calls.
To program the Incoming Calls option:
1.
From the Programming menu, select Communications, Comm. Options, Incoming Call [95408].
2.
Select Enabled or Disabled.
10.6.9.
Telecontrol/Vocal Message Timeout
The Telecontrol/Vocal Message Timeout (TC/VM Timeout) determines the duration of a Telecontrol, Two-Way Audio
or Vocal Message call. In the case of a Telecontrol or Two-Way Audio call, when the time out expires, the system
automatically disconnects unless the call is manually extended by the operator. For Vocal Message calls, if the time out
expires and the user has not acknowledged the message, the system attempts to call the next Voice Report account’s
telephone number. During a Vocal Message call, the timeout is reset each time a message is acknowledged.
To program the Telecontrol/Vocal Message Timeout:
1.
From the Programming menu, select Communications, Comm. Options, TC/VM Timeout [95409].
2.
Enter a time (001-255 seconds), then press '
√ʹ.
10.6.10.
Speed Dial Timeout
The Speed Dial timeout (SPD DIAL TMO) determines the duration of a Speed Dial call. When the timeout expires, the
system automatically disconnects unless the call is manually extended by the operator.
To program the Speed Dial Timeout:
1.
From the Programming menu, select Communications, Comm. Options, Spd Dial TMO [95410].
2.
Enter a time: (00:00 — 99:59), then press '
√ʹ.
10.6.11.
TWA Mode
The Two-Way audio features offer a choice of two operation modes:
•
Duplex – both parties may speak at once just like a regular telephone.
•
Simplex – one party may speak while the other party listens.
To program the TWA mode option:
1.
From the Programming menu, select Communications, Co
2.
mm. Options, TWA Mode [95411].
3.
Select Duplex or Simplex.
10.7.
GSM Options
10.7.1.
GSM RX Report
The GSM RX Report is a feature that periodically reads the GSM signal strength of the Cellular Communication module
– see p. 27,
4.7.10 GSM Signal Strength. This reading occurs at the times programmed for the Periodic Test – see p. 60,
10.6.2 Periodic Test Interval, and p. 60,
10.6.3 First Test. This means that each time the periodic test is sent, the system
also sends a GSM signal strength report to the central station. The system also enters the GSM signal strength in the
event log.
Содержание iconnect
