Electronics Line iconnect, Руководство по установке

Страница: 49 / 140

8 Entry/Exit Timers and System Tones
iConnect Installation Manual
45
8.7.2. Telephone Trouble Tones
Most trouble tones are not sounded between 10:00pm and 7:00am so as not to disturb the user late at night. Telephone
trouble, however, may be an attempt to sabotage the system by cutting the telephone wires. For this reason, you can
program telephone trouble tones to sound at all times.
To program the Telephone Trouble Tones option:
1.
From the Programming menu, select Tones, Tel. Trb. Tones [937].
2. Select Immediate or Delayed.
8.7.3. Fire Trouble Tones
The Fire Trouble Tones option is a feature designed to repeat fire-related trouble tones until the problem has been taken
care of. If this feature is enabled, fire trouble tones will be repeated 3½ hours after the user has manually silenced the
tones if the trouble condition has not been restored.
To program the Fire Trouble Tones option:
1.
From the Programming menu, select Tones, Fire Trb. Tones [938].
2. Select Enabled or Disabled.
It is not necessary to program the Telephone Trouble Tones and Fire Trouble Tones options
if the Trouble Tones option is programmed as disabled.
8.8. Tones Options
8.8.1. Tones Output
The Tones Output option enables you to determine whether the tones sounded when arming and disarming are
sounded by the Control System’s built-in siren or its built-in speaker.
To program the Tones Output option:
1.
From the Programming menu, select Tones, Tones Options, Tones Output [9391].
2. Select Siren or Speaker.
8.8.2. Control Panel Speaker Volume
The Control Panel Speaker Volume option determines the volume level of the tones sounded by the control panel
speaker.
To program the Control Panel Speaker Volume option:
1.
From the Programming menu, select Tones, Tones Options, CP Speaker Vol. [9392].
2. Select High, Medium, Low or Mute.
It is not necessary to program the Speaker Volume option if "Siren" is selected for the Tones
Output option.
8.8.3.
Wireless Keypad Speaker Volume
The Wireless Keypad Speaker Volume option determines the volume level of the tones sounded by the Wireless
Keypad speaker.
To program the Wireless Keypad Volume option:
1.
From the Programming menu, select Tones, Tones Options, KP Volume [9392].
2. Select the Wireless Keypad (1-4) that you want to program.
3. Select High, Medium, Low or Mute.