Electronics Line iconnect, Руководство по установке

Страница: 27 / 140

4 Advanced System Operation
iConnect Installation Manual
23
4.5. Follow-Me
The Follow-Me feature is designed to notify the user that certain events have occurred. The events that are sent to the
Follow-Me telephone number are those events that the user is authorized to view in the event log; events that can be
viewed only by the installer are not sent to the Follow-Me number – see p. 130, Appendix D: Event Table. If using the
TWA Follow-Me feature, the audio channel is opened after alarm events only.
To edit the Follow-Me number:
1.
From the main menu, select Telephone, Follow-me Number # [51].
2. Enter a telephone number for Follow-Me communication. If using the SMS Follow-Me feature, this number must
be for a cellular phone with the capability to receive SMS messages.
You may only access Follow-Me programming if the protocol for Account 3 is programmed
as SMS or TWA Follow-Me.
4.6. Event Log
The event log records the last 1022 events the system has undergone. The log uses the FIFO (First In, First Out) method,
automatically erasing the oldest event when the log is full.
To view the event log:
1.
From the Event Log menu, select View Log [61]; a summarized version of the most recent event is displayed.
Press the key to view the time/date stamp or the device/user number on the second row of the display.
2. Use the arrow keys to scroll through the events.
3. When you have finished viewing, press Χ to exit the log.
The event log displays the following information for each event:
• The event descriptor – a brief description of the event that occurred.
• The zone where the event occurred.
• Time/date stamp – the exact time the event occurred.
• Report details – a single character indicating whether the event was reported to the central station. The
options available are R: Report Sent, F: Report Failed, C: Report Canceled or N: No Report.
Figure 4-2 shows the detailed event log entry for a Fire alarm on November 14th 2008. The event was successfully
reported to the central station.
Figure 4-2: Detailed Event Log Display
4.6.1. Event Log Authorization Levels
Every event that occurs is recorded in the event log. However, certain events are intended for the installer only. Those
events include various service messages that are of little interest to the regular user. The View Log function requires
you to enter either the Master or Installer code. The events that are displayed depend on which code you use to enter
the log – see p.130, Appendix D: Event Table.
4.6.2. Clearing the Event Log
The Clear Log function erases all events from the log. After performing this function, a Clear Log event is recorded in
the log. The Clear Log function is accessible using the Installer code only.
To clear the event log:
1.
From the Event Log menu, select Clear Log [62]; the OK? confirmation message is displayed.
2. Press ' √ʹ; the log is cleared -- See p.130, Appendix D: Event Table.