Edirol DV-7PR, Руководство пользователя

Страница: 48 / 120

48
Introduction
2.
Click on one video clip in the palette area to start its playback.
3.
Click on another video clip to start the dissolve.
You can set the dissolve time to each video clip (p.67). In this case, the dissolve time is displayed in the right
hand of each video clip. For more information regarding the video clip display, refer to “w. Palette area”
(p. 33).
When the [Dual Stream] button is lit, the [Dissolve Time] slider is disabled.
Turning on/off looping playback
You can turn on/off the looping playback function of a video clip to replay itself, play in selected
order, or play video clips in selection.
Click the [Loop] button to switch modes.
fig.play.default
When the [Loop] button is lit, the video clip plays according to the looping mode setting. When
setting the looping mode, you can either assign the same setting to video clips of the entire palette,
or to each video clip individually.
To assign the same setting to video clips of an entire palette, refer to “Setting a palette” (p. 59). To set
each video clip, refer to “Setting the loop mode for each video clip” (p. 67).
When the [Loop] button is not lit, playback will stop at the last frame or the out point of the video clip.
[Loop] button