Edirol DV-7PR, Руководство пользователя

Страница: 35 / 120

35
Introduction
f. [Save] button
Click to save the changes made to the current project. For more information regarding the operation,
refer to “Saving a project” (p. 54).
You cannot change the name and save the changes. For more information regarding backing up projects,
refer to “Copying projects” (p. 75) and ““Changing the name of a project” (p. 76).
g. [Audio] button
Click to turn on or off the audio track of the current video clip. Clicking this button toggles the audio
track on and off. When clicked, the video clip is stopped. When the audio track is turned off, the
playback response time is improved.
Use the [Audio] slider to adjust the audio playback.
When the [Dual Stream] button is lit, the [Audio] button is disabled.
h. [Stop] button
Click to stop playback.
You can also reset the playback engine by clicking the [Stop] button again while playback is stopped.
When image and sound synchronization becomes fuzzy, you can reset to get them back to order.
i. [Play Mode] button
Click to enter the Play Mode (p.30).
j [Project] area
You can set a video clip to playback automatically right after the Presenter startup.
For more information regarding the operation, refer to “Setting a video clip to playback
automatically” (p. 70).
k. Palettes list
The names and the thumbnails of the first 8 video clips of palettes are shown here. Left-click to select
the palette. The video clips layed out in the selected palette appear in the Clips list below.
You can edit the palette, such as rename the palette, change the order of the video clips, and so on.
For more information regarding the palette editing operation, refer to “Editing a palette” (p. 58) .
You can also set the loop mode of each palette. For more information regarding the loop mode setting
operation, refer to “Setting a palette” (p. 59).
l. Clips list
Shows the video clips layed out in the palette selected at the Palettes list. You can left-click a video
clip to playback a video clip at the clip preview monitor. You can edit the video clip, such as rename
the video clip, change the order in the list, import other material to add a new video clip, and so on.
For more information regarding the video clip editing operation, refer to “Editing a video clip” (p.
60).
You can also set the loop mode for each video clip, adjust the dissolve time, coloring, audio volume,
and so on. For more information regarding the video clip setting operation, refer to “Setting a video
clip” (p. 63).
m. Parameter area
This area shows the various parameters of the video clip selected in the Clips list.
Here you can set the in/out points, dissolve time, looping mode, color correction, audio volume, and
so on.
For more information regarding the video clip setting operation, refer to “Setting a video clip” (p. 63).