Edirol DV-7PR, Руководство пользователя

Страница: 33 / 120

33
Introduction
t. [VFX 1, 2, 3, and 4] buttons
Click to add effects to the final video output. Multiple effects cannot be added simultaneously. Right-
click a button to choose the effect allocated that button. You can assign an effect to each individual
button, and click the button to toggle the effect.
For more information regarding the operation, refer to “Using video effects” (p. 51).
u. [None] button
Removes effect from the video.
v. [Defaults] button
Click to return all parameters to their default settings and remove all effects. The default settings are
given below.
• [Color Cr] slider: 0
• [Color Cb] slider: 0
• [Brightness] slider: 0
• [Dissolve Time] slider: 0.0 sec
• [Audio] slider: 0.0 dB
• [T Bar] slider: 100:0
• [Playback Speed] slider: 100%
w. Palette area
This area shows the thumbnails and settings of all the video clips on the palette. Click on a thumbnail
of a video clip to start the playback of that video clip.
Also, the looping and dissolve time setting are displayed.
fig.play.clip
w-1. The key on the keyboard to press to play back the video clip (p.46).
w-2. The dissolve time (seconds) set for each video clip (p.67). If no dissolve time is
set, nothing is displayed.
w-3. The loop setting for each video clip (p.67).
• : Playback stops at last frame or at an out point.
• : Loops playback.
•
:
Starts playback of next video clip.
•
:
Selects next video clip to playback.
•
:
Starts playback of next assigned video clip.
w-2
w-3
w-1